AS9120B, ISO 9001:2015, and FAA AC 0056B Accredited
Showing 1 of 16
| Part No. | Manufacturer | Description | Qty | RFQ |
|---|---|---|---|---|
| 5746686 | Sandvik Coromant | R571.31C-323222-12 T-Max® P head for turning | Avl |
|
| 6537691 | Sandvik Coromant | C6-SRSCR-45065-12HPA CoroTurn® 107 cutting unit for turning | Avl |
|
| 22727 | Techniks Inc | 1 1/2""-2.4"" CAT50 Single Ended Face Mill Arbor | Avl |
|
| 3874890 | Widia Erickson | HSK50AHPVTT05080M General Purpose Shrink Fit Toolholder | Avl |
|
| 5765057 | Sandvik Coromant | 570C-SVUBR-25-2 CoroTurn® 107 head for turning | Avl |
|
| 5730152 | Sandvik Coromant | C6-SRSCR-45065-12 CoroTurn® 107 cutting unit for turning | Avl |
|
| 5764392 | Sandvik Coromant | 570-DDXNR-32-11 T-Max® P head for turning | Avl |
|
| 1021744 | Widia Km | KM50NCMS50T Widia™ KM™ Clamping Unit | Avl |
|
| 5733427 | Sandvik Coromant | DSSNR 3232P 12 T-Max® P shank tool for turning | Avl |
|
| 5856756 | Sandvik Coromant | LF123F039-06B-S CoroCut® 1-2 shank tool for parting and grooving | Avl |
|
| 22983 | Techniks Inc | 8mm Bore 4.000"" CAT 50 Single Ended End Mill Holder | Avl |
|
| 17133 | Techniks Inc | 10mm Bore 63mm BT40 Single Ended End Mill Holder | Avl |
|
| 5907962 | Sandvik Coromant | C6-SVJBR-45065-16HP CoroTurn® 107 cutting unit for turning | Avl |
|
| 5725301 | Sandvik Coromant | CKJNR 20 3D T-Max® shank tool for turning | Avl |
|
| 1794235 | Widia Erickson | SS075TT050600 General Purpose Shrink Fit Toolholder | Avl |
|
| 2265311 | Widia Km | KM63TSMVHNL16 Widia™ KM™ Lock-Pin Cutting Unit | Avl |
|
| 2231604 | Widia Km | KM63XMZCS1663Y Widia™ KM™ Shell Mill Adapter | Avl |
|
| 3950835 | Widia Km | KM40TSBER Widia™ KM™ Cutoff Blade Holder | Avl |
|
| 3594313 | Widia Km | KM80ATCHPVTT125472 Widia™ KM™ Shrink Fit Adapter | Avl |
|
| 2388650 | Widia Km | KM63TSHC06070M Widia™ KM™ Hydraulic Chuck | Avl |
|
| 5730802 | Sandvik Coromant | DCLNR 12 4B T-Max® P shank tool for turning | Avl |
|
| 2265280 | Widia Km | KM63TSMDJNR1506 Widia™ KM™ Lock-Pin Cutting Unit | Avl |
|
| 6498895 | Widia | WGCM50L0532MC Single Ended Modular Blade | Avl |
|
| 3870340 | Widia | MSSNL10CA3 WIDIA™ ISO/Ansi Cartridge For Clamping System M | Avl |
|
| 5748988 | Sandvik Coromant | SCLCL 083C-S CoroTurn® 107 shank tool for turning | Avl |
|
| 1021576 | Widia Km | KM32NCMEF Widia™ KM™ Clamping Unit | Avl |
|
| 6639539 | Sandvik Coromant | C10-PRSCR-70130-32C T-Max® P cutting unit for turning | Avl |
|
| 6537349 | Sandvik Coromant | QS-RF123H20C2525E CoroCut® 1-2 QS shank tool for parting and grooving | Avl |
|
| 2269906 | Widia Km | KM63TSEM075236 Widia™ KM™ End Mill Adapter | Avl |
|
| 08516-08.0 | Techniks Inc | 5/16"" Black Gold ER16 Coolant Ring | Avl |
|
| 5730297 | Sandvik Coromant | C6-CSSNR-45056-12-4 T-Max® cutting unit for turning | Avl |
|
| 2265026 | Widia Km | KM63TSMCKNR16 Widia™ KM™ Lock-Pin Cutting Unit | Avl |
|
| 5752213 | Sandvik Coromant | SVJBL 1616K 11-S CoroTurn® 107 shank tool for turning | Avl |
|
| 3838706 | Widia Km | KM50TSS25JLSEL16 Widia™ KM™ Laydown Threading Tool | Avl |
|
| 5751636 | Sandvik Coromant | SVJBL 2020K 11 CoroTurn® 107 shank tool for turning | Avl |
|
| 3594315 | Widia Km | KM80ATCHPVTT100453 Widia™ KM™ Shrink Fit Adapter | Avl |
|
| 5908203 | Sandvik Coromant | LF123L28-3225B-140BM CoroCut® 1-2 shank tool for face grooving | Avl |
|
| 5732584 | Sandvik Coromant | LF123F10-2020B CoroCut® 1-2 shank tool for parting and grooving | Avl |
|
| 5734410 | Sandvik Coromant | L151.20-2012-30 T-Max® Q-Cut shank tool for parting and grooving | Avl |
|
| 3960034 | Widia Km | KM40TSSSSCR12 Widia™ KM™ Screw-On Cutting Unit | Avl |
|
| 6498898 | Widia | WGCM65L0632MC Single Ended Modular Blade | Avl |
|
| 3950199 | Widia Km | KM40TSEM12055M Widia™ KM™ End Mill Adapter | Avl |
|
| 3860049 | Widia Erickson | CVKV50BHPVTT038375 General Purpose Shrink Fit Toolholder | Avl |
|
| 5731146 | Sandvik Coromant | DDHNR 2525M 15 T-Max® P shank tool for turning | Avl |
|
| 3860173 | Widia Erickson | CVKV40BHPVTT32M400 General Purpose Shrink Fit Toolholder | Avl |
|
| 3950821 | Widia Km | KM40TSBA12065M Widia™ KM™ Boring Bar Adapter | Avl |
|
| 5726149 | Sandvik Coromant | CRDNN 3232P 19-ID T-Max® shank tool for turning | Avl |
|
| 5728340 | Sandvik Coromant | C4-MVUNR-27120-16 T-Max® P cutting unit for turning | Avl |
|
| 22929F | Techniks Inc | 1-1/2"" Bore 4.500"" CAT 40 Single End CoolFLEX End Mill Holder | Avl |
|
| 5733086 | Sandvik Coromant | LG123K079-16B-058BM CoroCut® 1-2 shank tool for face grooving | Avl |
|
| 3860012 | Widia Erickson | CVKV40BHPVTT050375 General Purpose Shrink Fit Toolholder | Avl |
|
| 5962601 | Sandvik Coromant | 570-SCLCL-40-12 CoroTurn® 107 head for turning | Avl |
|
| 3782159 | Widia Erickson | BT50BHPVTT038394 General Purpose Shrink Fit Toolholder | Avl |
|
| 1831587 | Widia Km | KM63XMZES40110Y Widia™ KM™ Offset Reducer | Avl |
|
| 8828300 | Kyocera Precision Tools Inc | DDJNR2525M1504 Right Hand Indexable External Turning Holder | Avl |
|
| 3959330 | Widia Km | KM40TSS25HMWLNL08 Widia™ KM™ Lock-Pin Cutting Unit | Avl |
|
| 22996 | Techniks Inc | 32mm Bore 4.600"" CAT 50 Single Ended End Mill Holder | Avl |
|
| 3790597 | Widia Km | KM50TSS40LNEL4 Widia™ KM™ Top Groove Thread Cutting Unit | Avl |
|
| 1144856 | Widia Km | KM63RCMVDI6060 Widia™ KM™ Clamping Unit | Avl |
|
| 6499227 | Widia | WGCMSL2525M65C Size 65 Modular Tool Holder | Avl |
|
| 3599310 | Widia Km | KM80ATCHPVTT038630 Widia™ KM™ Shrink Fit Adapter | Avl |
|
| 5740804 | Sandvik Coromant | RF123F079-16B CoroCut® 1-2 shank tool for parting and grooving | Avl |
|
| 6950289 | Sandvik Coromant | QS-SMALR1212E3HP-M CoroCut® XS QS shank tool for parting and grooving | Avl |
|
| 3103489 | Widia Km | KM63XMZMVJNR16Y Widia™ KM™ Lock-Pin Cutting Unit | Avl |
|
| 5727904 | Sandvik Coromant | C5-DTFNL-35060-16 T-Max® P cutting unit for turning | Avl |
|
| CAT40SLN1 8 | Techniks Inc | 1/8"" Bore 2.375"" CAT 40 Side Lock End Mill Holder | Avl |
|
| 7572092 | Sandvik Coromant | QS-PDJNL 2525-15C T-Max® P QS shank tool for turning | Avl |
|
| 3753585 | Widia Km | KM50TSNER4 Widia™ KM™ Top Groove Thread Cutting Unit | Avl |
|
| 16615-3 4 | Techniks Inc | 3/4""-1"" BT40 Single Ended Face Mill Arbor | Avl |
|
| 6537469 | Sandvik Coromant | QS-RF123H20C2020E-052B CoroCut® 1-2 QS shank tool for face grooving | Avl |
|
| 5750054 | Sandvik Coromant | SMALR 1010K 3-X CoroCut® XS shank tool for parting and grooving | Avl |
|
| 1144815 | Widia Km | KM32NCMSS20100 Widia™ KM™ Clamping Unit | Avl |
|
| 3665059 | Widia Km | KM80TSNEL6 Widia™ KM™ Top Groove Thread Cutting Unit | Avl |
|
| 80.104.50 | Haimer Usa Llc | Capto C5 Triple Chuck Support | Avl |
|
| 6188714 | Sandvik Coromant | C6-PCLNR-17100-12HP T-Max® P cutting unit for turning | Avl |
|
| 6462102 | Widia | WGCSML2525M0616C W250mm L1500mm Cut-Off Tool Holder | Avl |
|
| 3662529 | Widia Km | KM80TSMCLNR12 Widia™ KM™ Lock-Pin Cutting Unit | Avl |
|
| 5732400 | Sandvik Coromant | LF123J13-2020BM CoroCut® 1-2 shank tool for parting and grooving | Avl |
|
| 5750005 | Sandvik Coromant | SMALL 10C3 CoroCut® XS shank tool for parting and grooving | Avl |
|
| 5740849 | Sandvik Coromant | RF123D10-1010B-S CoroCut® 1-2 shank tool for parting and grooving | Avl |
|
| 6067799 | Sandvik Coromant | C10-PRDCN-00110-32 T-Max® P cutting unit for turning | Avl |
|
| 17140-1-5 | Techniks Inc | 1.0"" Bore 5.000"" BT40 Single End Extended Length End Mill Holder | Avl |
|
| 5741770 | Sandvik Coromant | R151.21-3225-30 T-Max® Q-Cut shank tool for parting and grooving | Avl |
|
| 3055511 | Widia Km | KM63XMZHCSLT06160MY Widia™ KM™ Hydraulic Chuck | Avl |
|
| 5757793 | Sandvik Coromant | 266RFG-244E CoroThread® 266 shank tool for thread turning | Avl |
|
| 5728470 | Sandvik Coromant | C5-CSDNN-00060-15-4 T-Max® cutting unit for turning | Avl |
|
| 5856792 | Sandvik Coromant | LF123F17-2525D CoroCut® 1-2 shank tool for parting and grooving | Avl |
|
| 5732402 | Sandvik Coromant | LF123J13-2525BM CoroCut® 1-2 shank tool for parting and grooving | Avl |
|
| 6537332 | Sandvik Coromant | QS-RF123E080C12F CoroCut® 1-2 QS shank tool for parting and grooving | Avl |
|
| 5753575 | Sandvik Coromant | TLRR-163D Top Lok shank tool for parting and grooving | Avl |
|
| 6536149 | Sandvik Coromant | SL-SDXCR-25-07-DHP CoroTurn® 107 head for turning | Avl |
|
| 5729604 | Sandvik Coromant | C6-DCLNR-27140-16 T-Max® P cutting unit for turning | Avl |
|
| 6537322 | Sandvik Coromant | QS-LF123H25C2020F CoroCut® 1-2 QS shank tool for parting and grooving | Avl |
|
| 3950760 | Widia Km | KM63XMZSMC27032MY Widia™ KM™ Shell Mill Adapter | Avl |
|
| 6224901 | Sandvik Coromant | QS-266RFA-103HP CoroThread® 266 QS shank tool for thread turning | Avl |
|
| 6188486 | Sandvik Coromant | PWLNL 2020K 08HP T-Max® P shank tool for turning | Avl |
|
| 2407970 | Widia Km | KM63TSPDJNL11 Widia™ KM™ P-Clamping Cutting Unit | Avl |
|
| 1013701 | Widia Km | KM63PKG3S Widia™ KM™ Clamping Unit Spare Parts | Avl |
|
| 6537403 | Sandvik Coromant | QS-LF123G063C12E CoroCut® 1-2 QS shank tool for parting and grooving | Avl |
|
| 5741200 | Sandvik Coromant | RF123J32-2525BM CoroCut® 1-2 shank tool for parting and grooving | Avl |
|
| 22717-4 | Techniks Inc | 1 1/2""-4"" CAT40 Single Ended Face Mill Arbor | Avl |
|
| 7192455 | Sandvik Coromant | QFU-LFG100C16-035B CoroCut® QF QS shank tool for face grooving | Avl |
|
| 7192484 | Sandvik Coromant | QFT-LGH100C16-035B CoroCut® QF QS shank tool for face grooving | Avl |
|
| 3738149 | Widia Km | KM50TSMDJNL1504 Widia™ KM™ Lock-Pin Cutting Unit | Avl |
|
| 3902276 | Widia Km | KM40TSMTUNL16 Widia™ KM™ Lock-Pin Cutting Unit | Avl |
|
| 6536142 | Sandvik Coromant | SL-SCLCL-25-09HP CoroTurn® 107 head for turning | Avl |
|
| 7192424 | Sandvik Coromant | QFU-RGH32C2525-065B CoroCut® QF QS shank tool for face grooving | Avl |
|
| 08540-18.0 | Techniks Inc | 45/64"" Black Gold ER40 Coolant Ring | Avl |
|
| 5740992 | Sandvik Coromant | RF123L063-16BM CoroCut® 1-2 shank tool for parting and grooving | Avl |
|
| 3738567 | Widia Km | KM50TSMSDNN12 Widia™ KM™ Lock-Pin Cutting Unit | Avl |
|
| 5732306 | Sandvik Coromant | LG151.37-2525-027B30 T-Max® Q-Cut shank tool for face grooving | Avl |
|
| 5750113 | Sandvik Coromant | SL70-CRDCL-18-09 T-Max® head for turning | Avl |
|
| 6536144 | Sandvik Coromant | SL-SDUCL-25-11HP CoroTurn® 107 head for turning | Avl |
|
| 7393099 | Sandvik Coromant | C5-CP-A-25BR40060-11B CoroTurn® Prime cutting unit for turning | Avl |
|
| 5732351 | Sandvik Coromant | DWLNL 2020K 08 T-Max® P shank tool for turning | Avl |
|
| 5727490 | Sandvik Coromant | C4-DSRNR-22050-12 T-Max® P cutting unit for turning | Avl |
|
| 5732602 | Sandvik Coromant | LF123E15-2020B CoroCut® 1-2 shank tool for parting and grooving | Avl |
|
| 3879738 | Widia | SRDCN2525M12 WIDIA™ ISO Tool Holder For External Turning | Avl |
|
| 5729318 | Sandvik Coromant | C6-MVUNR-35175-16 T-Max® P cutting unit for turning | Avl |
|
| 6498891 | Widia | WGCM50L0432MC Single Ended Modular Blade | Avl |
|
| 17150-3 8 | Techniks Inc | 3/8"" Bore 2.750"" BT50 Single Ended End Mill Holder | Avl |
|
| 1509861 | Widia Km | KM63XMZS50100Y Widia™ KM™ Reducer | Avl |
|
| 1021640 | Widia Km | KM40NCM6444 Widia™ KM™ Clamping Unit | Avl |
|
| 5751108 | Sandvik Coromant | SRSCL 20 6D CoroTurn® 107 shank tool for turning | Avl |
|
| 5733975 | Sandvik Coromant | DSSNL 3232P 15 T-Max® P shank tool for turning | Avl |
|
| 3950864 | Widia Km | KM63TSSMC050102 Widia™ KM™ Shell Mill Adapter | Avl |
|
| 6536141 | Sandvik Coromant | SL-SCLCR-25-09HP CoroTurn® 107 head for turning | Avl |
|
| 5908161 | Sandvik Coromant | RF123H13-2020B-052BM CoroCut® 1-2 shank tool for face grooving | Avl |
|
| 5740895 | Sandvik Coromant | RF123E067-10B-S CoroCut® 1-2 shank tool for parting and grooving | Avl |
|
| 3955549 | Widia Km | KM40TSS25EMCLNR12 Widia™ KM™ Lock-Pin Cutting Unit | Avl |
|
| 2269897 | Widia Km | KM63TSBA24413 Widia™ KM™ Boring Bar Adapter | Avl |
|
| 3902240 | Widia Km | KM40TSMVJNL16045M Widia™ KM™ Lock-Pin Cutting Unit | Avl |
|
| 5728852 | Sandvik Coromant | C6-DSSNR-45054-15 T-Max® P cutting unit for turning | Avl |
|
| 2407960 | Widia Km | KM63TSPCLNL19 Widia™ KM™ P-Clamping Cutting Unit | Avl |
|
| 6066654 | Sandvik Coromant | C4-PSSNR-27042-12HP T-Max® P cutting unit for turning | Avl |
|
| 5728099 | Sandvik Coromant | C5-MWLNL-22110-08 T-Max® P cutting unit for turning | Avl |
|
| 5732327 | Sandvik Coromant | DSKNL 5050T 25 T-Max® P shank tool for turning | Avl |
|
| 6224917 | Sandvik Coromant | QS-LF123E043-10BHP CoroCut® 1-2 QS shank tool for parting and grooving | Avl |
|
| 8819013 | Kyocera Precision Tools Inc | DDJNL164D Left Hand Indexable External Turning Holder | Avl |
|
| 3866686 | Widia Erickson | HSK63AHPVTT14120M General Purpose Shrink Fit Toolholder | Avl |
|
| 3615240 | Widia Erickson | CV50BHPVTT32M800 General Purpose Shrink Fit Toolholder | Avl |
|
| 5856809 | Sandvik Coromant | LF123H087-12D CoroCut® 1-2 shank tool for parting and grooving | Avl |
|
| 5729778 | Sandvik Coromant | C8-DSKNL-55080-25 T-Max® P cutting unit for turning | Avl |
|
| 3964071 | Widia Km | KM40TSST1045M Widia™ KM™ Tap Chuck | Avl |
|
| 22947-6 | Techniks Inc | 1-1/4"" Bore 6.000"" CAT 50 Single End Extended Length End Mill Holder | Avl |
|
| 22911-6FB | Techniks Inc | 1/4"" Bore 6.000"" CAT 40 Single End CoolFLEX and CoolBLAST End Mill Holder | Avl |
|
| 2044927 | Widia Km | KM50CL2NTEF Widia™ KM™ Clamping Unit | Avl |
|
| 6427589 | Sandvik Coromant | QD-LFH33-2525A CoroCut® QD shank tool for parting and grooving | Avl |
|
| 5749442 | Sandvik Coromant | SDJCR 1616H 07 CoroTurn® 107 shank tool for turning | Avl |
|
| 8828603 | Kyocera Precision Tools Inc | DVLNL2525M16 Left Hand Indexable External Turning Holder | Avl |
|
| 2407987 | Widia Km | KM63TSS32LPDUNL15 Widia™ KM™ P-Clamping Cutting Unit | Avl |
|
| 5751458 | Sandvik Coromant | SRGCL 12 3B CoroTurn® 107 shank tool for turning | Avl |
|
| 6071878 | Sandvik Coromant | C10-PLRNR-35110-50 T-Max® P cutting unit for turning | Avl |
|
| 5737579 | Sandvik Coromant | QS-266RFA-1616-16 CoroThread® 266 QS shank tool for thread turning | Avl |
|
| 5728198 | Sandvik Coromant | C5-CDJNR-35060-15-4 T-Max® cutting unit for turning | Avl |
|
| 5731457 | Sandvik Coromant | DVJNR 24 3D T-Max® P shank tool for turning | Avl |
|
| 5740930 | Sandvik Coromant | RF123H13-2525BM CoroCut® 1-2 shank tool for parting and grooving | Avl |
|
| 3950193 | Widia Km | KM40TSBN63125M Widia™ KM™ Machineable Blank | Avl |
|
| CAT50 SMH-1500-2000 | Dorian Tool International | 1-1/2"" ID x 2"" Long CAT 50 V-Flange Shell Mill Holder | Avl |
|
| 5730563 | Sandvik Coromant | DCLNL 24 5D T-Max® P shank tool for turning | Avl |
|
| 5740861 | Sandvik Coromant | RF123F20-1616B CoroCut® 1-2 shank tool for parting and grooving | Avl |
|
| 2265281 | Widia Km | KM63TSMDJNL1506 Widia™ KM™ Lock-Pin Cutting Unit | Avl |
|
| 5749929 | Sandvik Coromant | SL-PDUNR-32-11HP T-Max® P head for turning | Avl |
|
| 1-BS | Aloris Tool | #1-BS 5 Piece Basic Starter Tool Post & Holders Set | Avl |
|
| 3858948 | Widia Km | KM63XMZHPVTT062374Y Widia™ KM™ Shrink Fit Adapter | Avl |
|
| 3874985 | Widia Erickson | HSK50AHPVTT14090M General Purpose Shrink Fit Toolholder | Avl |
|
| 6066660 | Sandvik Coromant | C8-SVUBR-55080-16HP CoroTurn® 107 cutting unit for turning | Avl |
|
| 5731469 | Sandvik Coromant | DVPNL 2525M 16 T-Max® P shank tool for turning | Avl |
|
| 5733317 | Sandvik Coromant | LF123U023-06BM CoroCut® 3 shank tool for parting and grooving | Avl |
|
| 6188490 | Sandvik Coromant | PWLNR 2525M 08HP T-Max® P shank tool for turning | Avl |
|
| 6404586 | Sandvik Coromant | C5-SDUCR-13080-11HP CoroTurn® 107 cutting unit for turning | Avl |
|
| 17150-1-4.5 | Techniks Inc | 1.0"" Bore 4.500"" BT50 Single Ended End Mill Holder | Avl |
|
| 5751142 | Sandvik Coromant | SRSCL 3225P 12 CoroTurn® 107 shank tool for turning | Avl |
|
| 3738614 | Widia Km | KM50TSMSRNL19 Widia™ KM™ Lock-Pin Cutting Unit | Avl |
|
| 4160613 | Widia Km | KM4X100BN130200M Widia™ KM™ Machineable Bar Blank | Avl |
|
| 5749539 | Sandvik Coromant | SDNCN 1616H 11 CoroTurn® 107 shank tool for turning | Avl |
|
| 5727676 | Sandvik Coromant | C4-DWLNL-17090-08 T-Max® P cutting unit for turning | Avl |
|
| 5727789 | Sandvik Coromant | C4-SDUCL-22110-11 CoroTurn® 107 cutting unit for turning | Avl |
|
| 3866715 | Widia Erickson | HSK100AHPVTT14160M General Purpose Shrink Fit Toolholder | Avl |
|
| 3838710 | Widia Km | KM50TSS40LLSER16 Widia™ KM™ Laydown Threading Tool | Avl |
|
| 5742224 | Sandvik Coromant | R151.20-12-30A T-Max® Q-Cut shank tool for parting and grooving | Avl |
|
| 7100745 | Sandvik Coromant | CP-25BL-20-11 CoroTurn® Prime shank tool for turning | Avl |
|
| 5751444 | Sandvik Coromant | SRGCL 20 6D CoroTurn® 107 shank tool for turning | Avl |
|
| 4160344 | Widia Km | KM4X100SMC32100M Widia™ KM™ Metric Shell Mill Adapter | Avl |
|
| 5740931 | Sandvik Coromant | RF151.23-20-30 T-Max® Q-Cut shank tool for parting and grooving | Avl |
|
| 3738620 | Widia Km | KM50TSMSSNL19 Widia™ KM™ Lock-Pin Cutting Unit | Avl |
|
| 5734579 | Sandvik Coromant | LF123K32-3225BM CoroCut® 1-2 shank tool for parting and grooving | Avl |
|
| 3103490 | Widia Km | KM63XMZMVJNLF16Y Widia™ KM™ Lock-Pin Cutting Unit | Avl |
|
| 6188375 | Sandvik Coromant | C5-PCLNL-17090-12M1 T-Max® P cutting unit for turning | Avl |
|
| 5740961 | Sandvik Coromant | RF123T06-3232BM CoroCut® 3 shank tool for parting and grooving | Avl |
|
| 3874989 | Widia Erickson | HSK50AHPVTT06120M General Purpose Shrink Fit Toolholder | Avl |
|
| 3662600 | Widia Km | KM80TSPCLNL19 Widia™ KM™ P-Clamping Cutting Unit | Avl |
|
| 3661826 | Widia Km | KM63XMZHPVTT12090MY Widia™ KM™ Shrink Fit Adapter | Avl |
|
| 17150-5 8 | Techniks Inc | 5/8"" Bore 3.000"" BT50 Single Ended End Mill Holder | Avl |
|
| 6427663 | Sandvik Coromant | QS-QD-LFH40C2525D CoroCut® QD QS shank tool for parting and grooving | Avl |
|
| 3870042 | Widia | CKJNL2525M16 WIDIA™ ISO Tool Holder For External Turning | Avl |
|
| 5738841 | Sandvik Coromant | PSBNL 2525M 12 T-Max® P shank tool for turning | Avl |
|
| 3863704 | Widia Erickson | HSK50AHPVTT075394 General Purpose Shrink Fit Toolholder | Avl |
|
| 3670534 | Widia Km | KM80TSSMC250450 Widia™ KM™ Shell Mill Adapter | Avl |
|
| 3960004 | Widia Km | KM40TSSDJCL11 Widia™ KM™ Screw-On Cutting Unit | Avl |
|
| 2388644 | Widia Km | KM63TSHC038300 Widia™ KM™ Hydraulic Chuck | Avl |
|
| 2231264 | Widia Km | KM63XMZPCLNLF12Y Widia™ KM™ P-Clamping Cutting Unit | Avl |
|
| 08532-11.0 | Techniks Inc | 27/64"" Black Gold ER32 Coolant Ring | Avl |
|
| 1785032 | Widia Km | KM40CL2NTEF Widia™ KM™ Clamping Unit | Avl |
|
| 5724316 | Sandvik Coromant | CDJNR 3225P 15-4 T-Max® shank tool for turning | Avl |
|
| 80.102.50 | Haimer Usa Llc | SK50 Triple Chuck Support | Avl |
|
| 6498868 | Widia | WGCM50R0532MC Single Ended Modular Blade | Avl |
|
| 3683497 | Widia Erickson | CV40BHPVTT10M600 General Purpose Shrink Fit Toolholder | Avl |
|
| 2265297 | Widia Km | KM63TSMSRNL12 Widia™ KM™ Lock-Pin Cutting Unit | Avl |
|
| 2265294 | Widia Km | KM63TSMSKNR19 Widia™ KM™ Lock-Pin Cutting Unit | Avl |
|
| 6427607 | Sandvik Coromant | QD-RFF1000-12S CoroCut® QD shank tool for parting and grooving | Avl |
|
| 3670508 | Widia Km | KM80TSSMC100158 Widia™ KM™ Shell Mill Adapter | Avl |
|
| 7001951 | other | 6.12"" Outter Diam 7"" Holder Lngth Cat 50 Taper Blank Bar | Avl |
|
| 5735154 | Sandvik Coromant | LF151.23-08-25 T-Max® Q-Cut shank tool for parting and grooving | Avl |
|
| 5729492 | Sandvik Coromant | DCBNL 4040S 19 T-Max® P shank tool for turning | Avl |
|
| 5740979 | Sandvik Coromant | RF123K16-2525BM CoroCut® 1-2 shank tool for parting and grooving | Avl |
|
| 5728334 | Sandvik Coromant | C4-MVJNL-27050-16 T-Max® P cutting unit for turning | Avl |
|
| 5749482 | Sandvik Coromant | SDJCR 1010K 07-S CoroTurn® 107 shank tool for turning | Avl |
|
| 3949893 | Widia Km | KM50TSWGMEL55M Widia™ KM™ Grooving and Cut-Off Unit | Avl |
|
| 5728326 | Sandvik Coromant | C4-STFCR-11070-11-B1 CoroTurn® 107 cutting unit for turning | Avl |
|
| 5731101 | Sandvik Coromant | DDJNR 2525M 15-2 T-Max® shank tool for turning | Avl |
|
| 3964067 | Widia Km | KM40TSWTJNR16 Widia™ KM™ Wedgelock | Avl |
|
| 3866695 | Widia Erickson | HSK63AHPVTT20120M General Purpose Shrink Fit Toolholder | Avl |
|
| 08525-14.0 | Techniks Inc | 35/64"" Black Gold ER25 Coolant Ring | Avl |
|
| 3867272 | Widia Erickson | HSK80AHPVTT10090M General Purpose Shrink Fit Toolholder | Avl |
|
| 6537509 | Sandvik Coromant | QS-LF123G080C16E-090B CoroCut® 1-2 QS shank tool for face grooving | Avl |
|
| 08520-11.5 | Techniks Inc | 7/16"" Black Gold ER20 Coolant Ring | Avl |
|
| 44.653.72.600 | Techniks Inc | 1-1/4"" Bore 6.000"" CAT 50 Single End DualDRIVE End Mill Holder | Avl |
|
| 5741363 | Sandvik Coromant | RG123L20-2525B-140BM CoroCut® 1-2 shank tool for face grooving | Avl |
|
| 5728179 | Sandvik Coromant | C5-CCRNL-27060-12-4 T-Max® cutting unit for turning | Avl |
|
| 3746984 | Widia Km | KM50TSCSKNL12MX7 Widia™ KM™ Ceramic Cutting Unit | Avl |
|
| 5725307 | Sandvik Coromant | CKJNR 3225P 16 T-Max® shank tool for turning | Avl |
|
| 5051373 | Walter | SBN20-32KS-E Cut Toolholders for Grooving and Threading EDP# 5051373 | Avl |
|
| 6188384 | Sandvik Coromant | C5-PCLNR-35100-12M1 T-Max® P cutting unit for turning | Avl |
|
| 3789941 | Widia Km | KM50TSBA16276 Widia™ KM™ Boring Bar Adapter | Avl |
|
| 5729302 | Sandvik Coromant | C6-SCLCL-45065-09 CoroTurn® 107 cutting unit for turning | Avl |
|
| 5729266 | Sandvik Coromant | C5-SVQBR-18090-16 CoroTurn® 107 cutting unit for turning | Avl |
|
| 3747120 | Widia Km | KM50TSS40LMWLNR08 Widia™ KM™ Lock-Pin Cutting Unit | Avl |
|
| 5908151 | Sandvik Coromant | RF123G13-2020B-090B CoroCut® 1-2 shank tool for face grooving | Avl |
|
| 2407962 | Widia Km | KM63TSS25KPCLNL12 Widia™ KM™ P-Clamping Cutting Unit | Avl |
|
| 44.653.77.460 | Techniks Inc | 1-1/2"" Bore 4.600"" CAT 50 Single End DualDRIVE End Mill Holder | Avl |
|
| 2408037 | Widia Km | KM63TSPWLNR08 Widia™ KM™ P-Clamping Cutting Unit | Avl |
|
| 5732473 | Sandvik Coromant | DVPNR 4040S 16 T-Max® P shank tool for turning | Avl |
|
| 5729666 | Sandvik Coromant | C8-DCKNL-55080-19 T-Max® P cutting unit for turning | Avl |
|
| 5751880 | Sandvik Coromant | SVJBL 1010K 11-S-B1 CoroTurn® 107 shank tool for turning | Avl |
|
| 6224905 | Sandvik Coromant | QS-LF123E11-1616BHP CoroCut® 1-2 QS shank tool for parting and grooving | Avl |
|
| 3879316 | Widia | PDJNL4025R15 WIDIA™ ISO Tool Holder For External Turning | Avl |
|
| 22949B | Techniks Inc | 1-1/2"" Bore 4.600"" CAT 50 Single End CoolBLAST End Mill Holder | Avl |
|
| 5725304 | Sandvik Coromant | CKJNR 2525M 16 T-Max® shank tool for turning | Avl |
|
| 17140-1 4F | Techniks Inc | 1/4"" Bore 2.500"" BT40 Single End CoolFLEX End Mill Holder | Avl |
|
| 08540-12.0 | Techniks Inc | 15/32"" Black Gold ER40 Coolant Ring | Avl |
|
| 6537464 | Sandvik Coromant | QS-RF123G20C2525E-067B CoroCut® 1-2 QS shank tool for face grooving | Avl |
|
| 3955548 | Widia Km | KM40TSS25EMCLNL12 Widia™ KM™ Lock-Pin Cutting Unit | Avl |
|
| 5764365 | Sandvik Coromant | 570-SDXCL-32-11 CoroTurn® 107 head for turning | Avl |
|
| 2420363 | Widia Km | KM40LCMVDI3035 Widia™ KM™ Clamping Unit | Avl |
|
| 3902247 | Widia Km | KM40TSMTFNL16 Widia™ KM™ Lock-Pin Cutting Unit | Avl |
|
| 7182451 | Sandvik Coromant | CP-30AL-12-11 CoroTurn® Prime QS shank tool for turning | Avl |
|
| 5734847 | Sandvik Coromant | LX123J05-2020B-045 CoroCut® 1-2 shank tool for profiling | Avl |
|
| 5738906 | Sandvik Coromant | PTGNL 1616H 11 T-Max® P shank tool for turning | Avl |
|
| 80.103.50 | Haimer Usa Llc | HSK50 Triple Chuck Support | Avl |
|
| 6462070 | Widia | WGCSMR3232P0632C W320mm L1700mm Cut-Off Tool Holder | Avl |
|
| 5751366 | Sandvik Coromant | SVABR 1212K 16-S CoroTurn® 107 shank tool for turning | Avl |
|
| 5741027 | Sandvik Coromant | RF123J079-16B-180BM CoroCut® 1-2 shank tool for face grooving | Avl |
|
| 6188674 | Sandvik Coromant | C4-PWLNL-17090-08HP T-Max® P cutting unit for turning | Avl |
|
| 5730241 | Sandvik Coromant | C6-PRSCR-45065-25 T-Max® P cutting unit for turning | Avl |
|
| 3790211 | Widia Erickson | DV50BHPVTT08160M General Purpose Shrink Fit Toolholder | Avl |
|
| 5728152 | Sandvik Coromant | C5-PDJNR-35060-15HP T-Max® P cutting unit for turning | Avl |
|
| 5764254 | Sandvik Coromant | 570-DDUNR-32-11 T-Max® P head for turning | Avl |
|
| 3879413 | Widia | SCLCL2525M12 WIDIA™ ISO Tool Holder For External Turning | Avl |
|
| 5728758 | Sandvik Coromant | C5-SVMBL-00115-16 CoroTurn® 107 cutting unit for turning | Avl |
|
| 1801299 | Widia Erickson | SS200TT04150M General Purpose Shrink Fit Toolholder | Avl |
|
| 3790584 | Widia Km | KM50TSS12ENEL2 Widia™ KM™ Top Groove Thread Cutting Unit | Avl |
|
| 08516-06.0 | Techniks Inc | 7/32"" Black Gold ER16 Coolant Ring | Avl |
|
| 5926285 | Sandvik Coromant | QS-LF123G067-10B CoroCut® 1-2 QS shank tool for parting and grooving | Avl |
|
| 3860165 | Widia Erickson | CVKV40BHPVTT08M350 General Purpose Shrink Fit Toolholder | Avl |
|
| 5732666 | Sandvik Coromant | LF123D08-1212B CoroCut® 1-2 shank tool for parting and grooving | Avl |
|
| 3901296 | Widia Km | KM40TSMDQNL1506 Widia™ KM™ Lock-Pin Cutting Unit | Avl |
|
| 44.653.61.400 | Techniks Inc | 5/8"" Bore 4.000"" CAT 50 Single End DualDRIVE End Mill Holder | Avl |
|
| 3741392 | Widia Km | KM50TSPDJNR15 Widia™ KM™ P-Clamping Cutting Unit | Avl |
|
| 5739765 | Sandvik Coromant | PSKNR 2525M 15 T-Max® P shank tool for turning | Avl |
|
| 5738962 | Sandvik Coromant | PRGCR 2020K 12 T-Max® P shank tool for turning | Avl |
|
| 6188440 | Sandvik Coromant | PCLNR 3225P 12HP T-Max® P shank tool for turning | Avl |
|
| 3902253 | Widia Km | KM40TSMVUNR16045M Widia™ KM™ Lock-Pin Cutting Unit | Avl |
|
| 3617667 | Widia Erickson | DV50BHPVTT16120M General Purpose Shrink Fit Toolholder | Avl |
|
| 3950247 | Widia Km | KM40TSER25045M Widia™ KM™ Collet Chuck | Avl |
|
| 5741188 | Sandvik Coromant | RF123K126-24BM CoroCut® 1-2 shank tool for parting and grooving | Avl |
|
| 6424634 | Sandvik Coromant | SL-SVLBR-40-16HP CoroTurn® 107 head for turning | Avl |
|
| 5725912 | Sandvik Coromant | CRSNL 2525M 09-ID T-Max® shank tool for turning | Avl |
|
| 5856793 | Sandvik Coromant | LF123G22-2020D CoroCut® 1-2 shank tool for parting and grooving | Avl |
|
| 5727495 | Sandvik Coromant | C4-DDJNR-27050-11 T-Max® P cutting unit for turning | Avl |
|
| 5723066 | Sandvik Coromant | CCBNL 3225P 12-4 T-Max® shank tool for turning | Avl |
|
| 6537535 | Sandvik Coromant | QS-RF123G055C12E-034B CoroCut® 1-2 QS shank tool for face grooving | Avl |
|
| 6224918 | Sandvik Coromant | QS-RF123E067-10BHP CoroCut® 1-2 QS shank tool for parting and grooving | Avl |
|
| 3753669 | Widia Km | KM50TSS40JMCLNL12 Widia™ KM™ Lock-Pin Cutting Unit | Avl |
|
| 6537522 | Sandvik Coromant | QS-LF123H100C16E-220B CoroCut® 1-2 QS shank tool for face grooving | Avl |
|
| 6537354 | Sandvik Coromant | QS-RF123J20C2020E CoroCut® 1-2 QS shank tool for parting and grooving | Avl |
|
| 5856649 | Sandvik Coromant | RF123F15-1212B-S CoroCut® 1-2 shank tool for parting and grooving | Avl |
|
| 5725341 | Sandvik Coromant | CKJNL 2525M 16 T-Max® shank tool for turning | Avl |
|
| 5750131 | Sandvik Coromant | SL70-CRDCR-18-09 T-Max® head for turning | Avl |
|
| 5854353 | Sandvik Coromant | RF123R125-20B CoroCut® 1-2 shank tool for parting and grooving | Avl |
|
| 5751090 | Sandvik Coromant | STDCR 062-B1 CoroTurn® 107 shank tool for turning | Avl |
|
| 5738946 | Sandvik Coromant | PRGCL 3225P 12 T-Max® P shank tool for turning | Avl |
|
| 6010218 | Sandvik Coromant | QS-SMALR103XHP CoroCut® XS QS shank tool for parting and grooving | Avl |
|
| 5733901 | Sandvik Coromant | LF151.37-2525-027B30 T-Max® Q-Cut shank tool for face grooving | Avl |
|
| 5735074 | Sandvik Coromant | L190.1-K075J008-T33 Tool for bar peeling | Avl |
|
| 6921656 | Sandvik Coromant | QS-QD-LFE16C1616S CoroCut® QD QS shank tool for parting and grooving | Avl |
|
| 3860047 | Widia Erickson | CVKV50BHPVTT025350 General Purpose Shrink Fit Toolholder | Avl |
|
| 5728367 | Sandvik Coromant | C5-SRSCL-35060-20 CoroTurn® 107 cutting unit for turning | Avl |
|
| 5962015 | Sandvik Coromant | QS-LF123U023-08B CoroCut® 3 QS shank tool for parting and grooving | Avl |
|
| 2258495 | Widia Km | KM63TSEM25080M Widia™ KM™ End Mill Adapter | Avl |
|
| 6537476 | Sandvik Coromant | QS-RF123H25C2525E-220B CoroCut® 1-2 QS shank tool for face grooving | Avl |
|
| 5742009 | Sandvik Coromant | R151.20-2020-25 T-Max® Q-Cut shank tool for parting and grooving | Avl |
|
| 1021526 | Widia Km | KM63ECMS80W Widia™ KM™ Clamping Unit | Avl |
|
| 3789296 | Widia Km | KM50TSS40LPWLNR08 Widia™ KM™ P-Clamping Cutting Unit | Avl |
|
| 3869257 | Widia Km | KM63TSHPVTT050354 Widia™ KM™ Shrink Fit Adapter | Avl |
|
| 5853746 | Sandvik Coromant | RF123H13-2525B-092BM CoroCut® 1-2 shank tool for face grooving | Avl |
|
| 7393100 | Sandvik Coromant | C5-CP-A-25BL40060-11B CoroTurn® Prime cutting unit for turning | Avl |
|
| 44.151.72.350 | Techniks Inc | 1-1/4""-3.5"" CAT50 Single Ended DualDRIVE Face Mill Arbor | Avl |
|
| 16642 | Techniks Inc | 1-1/4""-1.77"" BT50 Single Ended Face Mill Arbor | Avl |
|
| 2265370 | Widia Km | KM63TSS32LNEL3 Widia™ KM™ Top Groove Thread Cutting Unit | Avl |
|
| 5740914 | Sandvik Coromant | RF123H13-1616B CoroCut® 1-2 shank tool for parting and grooving | Avl |
|
| 08525-07.5 | Techniks Inc | 9/32"" Black Gold ER25 Coolant Ring | Avl |
|
| 5853295 | Sandvik Coromant | C6-PSRNL-35065-15HP T-Max® P cutting unit for turning | Avl |
|
| 5729813 | Sandvik Coromant | C8-DDJNR-55080-15 T-Max® P cutting unit for turning | Avl |
|
| 6498990 | Widia | WGCBSN26J1F17 Double Ended Cut-Off Blade | Avl |
|
| 7439598 | Sandvik Coromant | C5-CRSNR-35060-09ID T-Max® cutting unit for turning | Avl |
|
| 5729036 | Sandvik Coromant | C6-SVJBR-45065-16 CoroTurn® 107 cutting unit for turning | Avl |
|
| 44.151.64.150 | Techniks Inc | 3/4""-1.5"" CAT50 Single Ended DualDRIVE Face Mill Arbor | Avl |
|
| 5727866 | Sandvik Coromant | C4-SVQBL-22110-16 CoroTurn® 107 cutting unit for turning | Avl |
|
| 5732633 | Sandvik Coromant | LF123E032-08B CoroCut® 1-2 shank tool for parting and grooving | Avl |
|
| 6921710 | Sandvik Coromant | QS-QD-LFF13C1212S CoroCut® QD QS shank tool for parting and grooving | Avl |
|
| 3879750 | Widia | STFCR2525M16 WIDIA™ ISO Tool Holder For External Turning | Avl |
|
| 5738880 | Sandvik Coromant | PSBNR 3232P 19 T-Max® P shank tool for turning | Avl |
|
| 394240-1002 | Fiskars Industrial | 9 Pocket Garden Bucket Caddy | Avl |
|
| 5739256 | Sandvik Coromant | PSSNL 1616H 09 T-Max® P shank tool for turning | Avl |
|
| 5741032 | Sandvik Coromant | RF150.23-3244M-0635C T-Max® shank tool for parting and grooving | Avl |
|
| 5764411 | Sandvik Coromant | 570-SVLBL-40-16 CoroTurn® 107 head for turning | Avl |
|
| 3782138 | Widia Erickson | BT40BHPVTT08160M General Purpose Shrink Fit Toolholder | Avl |
|
| 22941-8 | Techniks Inc | 3/4"" Bore 8.000"" CAT 50 Single End Extended Length End Mill Holder | Avl |
|
| 5734584 | Sandvik Coromant | LF123L138-20BM CoroCut® 1-2 shank tool for parting and grooving | Avl |
|
| 3959348 | Widia Km | KM40TSS25GPWLNL08 Widia™ KM™ P-Clamping Cutting Unit | Avl |
|
| 3661825 | Widia Km | KM63XMZHPVTT10090MY Widia™ KM™ Shrink Fit Adapter | Avl |
|
| 3902313 | Widia Km | KM40TSPCLNL12 Widia™ KM™ P-Clamping Cutting Unit | Avl |
|
| 6188475 | Sandvik Coromant | PTGNR 2020K 16HP T-Max® P shank tool for turning | Avl |
|
| 4160338 | Widia Km | KM4X100SMC22160M Widia™ KM™ Metric Shell Mill Adapter | Avl |
|
| 6537325 | Sandvik Coromant | QS-LF123J20C2020E CoroCut® 1-2 QS shank tool for parting and grooving | Avl |
|
| 3950777 | Widia Km | KM40TSPSKNL12 Widia™ KM™ P-Clamping Cutting Unit | Avl |
|
| 5729981 | Sandvik Coromant | C8-PCLNR-55080-12 T-Max® P cutting unit for turning | Avl |
|
| 5740854 | Sandvik Coromant | RF123F10-1616B CoroCut® 1-2 shank tool for parting and grooving | Avl |
|
| 1319536 | Widia Km | KM63XMZS6380Y Widia™ KM™ Extension | Avl |
|
| 08525-26(SET | Techniks Inc | 26Pc Black Gold ER25 Coolant Ring Set | Avl |
|
| 17140-1 2F | Techniks Inc | 1/2"" Bore 2.500"" BT40 Single End CoolFLEX End Mill Holder | Avl |
|
| 6537365 | Sandvik Coromant | RF123M32C3232E CoroCut® 1-2 shank tool for parting and grooving | Avl |
|
| 5728410 | Sandvik Coromant | C5-SRSCL-35060-06 CoroTurn® 107 cutting unit for turning | Avl |
|
| 5732464 | Sandvik Coromant | DVVNN 20 3D T-Max® P shank tool for turning | Avl |
|
| 5926279 | Sandvik Coromant | QS-RF123G067-10B CoroCut® 1-2 QS shank tool for parting and grooving | Avl |
|
| 6499216 | Widia | WGCBSN26J0440 Double Ended Cut-Off Blade | Avl |
|
| 22911-4.72-RR | Techniks Inc | 1/4"" Bore 4.720"" CAT 40 Single End Rigid Reach End Mill Holder | Avl |
|
| 22973 | Techniks Inc | 20mm Bore 3.000"" CAT 40 Single Ended End Mill Holder | Avl |
|
| 17130-3 16 | Techniks Inc | 3/16"" Bore 2.360"" BT30 Single Ended End Mill Holder | Avl |
|
| 5740031 | Sandvik Coromant | PSDNN 1010E 09 T-Max® P shank tool for turning | Avl |
|
| 5738220 | Sandvik Coromant | PCLNL 3232P 16 T-Max® P shank tool for turning | Avl |
|
| 5732280 | Sandvik Coromant | LG123L20-2525B-075BM CoroCut® 1-2 shank tool for face grooving | Avl |
|
| 2005802 | Widia | 12625805100 50mm-67mm ROTAFLEX™ 90° Lead Insert Holder - T Style | Avl |
|
| 32994 | Techniks Inc | 1-1/4"" Bore 4.250"" HSK100A Single Ended End Mill Holder | Avl |
|
| 5751198 | Sandvik Coromant | SRSCR 3225P 12 CoroTurn® 107 shank tool for turning | Avl |
|
| 6950302 | Sandvik Coromant | QS-SMALL063XHP CoroCut® XS QS shank tool for parting and grooving | Avl |
|
| 6196285 | Sandvik Coromant | SDJCR 10 3HP CoroTurn® 107 shank tool for turning | Avl |
|
| 5726240 | Sandvik Coromant | CTGPR 12 3B T-Max® S shank tool for turning | Avl |
|
| 5908251 | Sandvik Coromant | RF123L110-20B-140BM CoroCut® 1-2 shank tool for face grooving | Avl |
|
| 7572085 | Sandvik Coromant | QS-PCLNR 16 4C T-Max® P QS shank tool for turning | Avl |
|
| 2407993 | Widia Km | KM63TSPDXNL15 Widia™ KM™ P-Clamping Cutting Unit | Avl |
|
| 4160321 | Widia Km | KM4X100SMC250400 Widia™ KM™ Shell Mill Adapter | Avl |
|
| 5729202 | Sandvik Coromant | C6-DCRNL-35065-19 T-Max® P cutting unit for turning | Avl |
|
| 5962458 | Sandvik Coromant | 570-SCLCR-32-09 CoroTurn® 107 head for turning | Avl |
|
| 3879772 | Widia | SVJBL1616H16 WIDIA™ ISO Tool Holder For External Turning | Avl |
|
| 4156117 | Widia Km | KM4X100HPVTT16160M Widia™ KM™ Shrink Fit Toolholder | Avl |
|
| 08525-15.0 | Techniks Inc | 37/64"" Black Gold ER25 Coolant Ring | Avl |
|
| DG5139 | Clc Custom Leathercraft | Black/Yellow HD Polyester DEWALT® CLC WORK GEAR® Hammer Holder | Avl |
|
| 5003 | Clc Custom Leathercraft | 5003 Large Polyester Electrical Meter/Tester/Phone Holder | Avl |
|
| 3741390 | Widia Km | KM50TSPDJNR11 Widia™ KM™ P-Clamping Cutting Unit | Avl |
|
| 1621054 | Widia Km | KM63XMZEM10100Y Widia™ KM™ End Mill Adapter | Avl |
|
| 2024091 | Widia | S08ASCMCN065 WIDIA™ ISO Miniature Holder For Turning | Avl |
|
| 32964 | Techniks Inc | 1-1/4"" Bore 4.250"" HSK63A Single Ended End Mill Holder | Avl |
|
| 5740953 | Sandvik Coromant | RF151.23-12-25 T-Max® Q-Cut shank tool for parting and grooving | Avl |
|
| 1023726 | Widia Km | KM50PKG3S Widia™ KM™ Clamping Unit Spare Parts | Avl |
|
| 5738884 | Sandvik Coromant | PTFNL 1616H 16 T-Max® P shank tool for turning | Avl |
|
| 2255042 | Widia Km | KM63TSER25065M Widia™ KM™ Collet Chuck | Avl |
|
| 3955488 | Widia Km | KM40TSS25HNEL2 Widia™ KM™ Top Groove Thread Cutting Unit | Avl |
|
| 3790210 | Widia Erickson | DV50BHPVTT08120M General Purpose Shrink Fit Toolholder | Avl |
|
| 3866572 | Widia Erickson | HSK63AHPVTT08120M General Purpose Shrink Fit Toolholder | Avl |
|
| 2269910 | Widia Km | KM63TSEM150374 Widia™ KM™ End Mill Adapter | Avl |
|
| 3747118 | Widia Km | KM50TSBER Widia™ KM™ Cutoff Blade Holder | Avl |
|
| 5727683 | Sandvik Coromant | C4-DWLNL-27050-06 T-Max® P cutting unit for turning | Avl |
|
| 7445838 | Sandvik Coromant | QS-SCLCR 12 3C CoroTurn® 107 QS shank tool for turning | Avl |
|
| 5729735 | Sandvik Coromant | C6-DSKNL-45065-15 T-Max® P cutting unit for turning | Avl |
|
| 6188452 | Sandvik Coromant | PDJNR 1616H 11HP T-Max® P shank tool for turning | Avl |
|
| 08540-26.0 | Techniks Inc | 1-1/64"" Black Gold ER40 Coolant Ring | Avl |
|
| 3866581 | Widia Erickson | HSK63AHPVTT10160M General Purpose Shrink Fit Toolholder | Avl |
|
| 3864087 | Widia Erickson | HSK63AHPVTT044472 General Purpose Shrink Fit Toolholder | Avl |
|
| 1714893 | Widia Km | KM63XMZER4090Y Widia™ KM™ Collet Chuck | Avl |
|
| 5740935 | Sandvik Coromant | RF123L28-2525B-140BM CoroCut® 1-2 shank tool for face grooving | Avl |
|
| 5727518 | Sandvik Coromant | C4-DDNNN-00050-11 T-Max® P cutting unit for turning | Avl |
|
| 5731035 | Sandvik Coromant | DDJNL 16 4D T-Max® P shank tool for turning | Avl |
|
| 5734472 | Sandvik Coromant | DSRNR 24 6D T-Max® P shank tool for turning | Avl |
|
| 5853294 | Sandvik Coromant | C6-PSKNR-45065-19HP T-Max® P cutting unit for turning | Avl |
|
| 5728298 | Sandvik Coromant | C4-DVJNR-27062-16 T-Max® P cutting unit for turning | Avl |
|
| 3662624 | Widia Km | KM80TSPRGCL32 Widia™ KM™ P-Clamping Cutting Unit | Avl |
|
| 3065885 | Widia Km | KM63TSCCRNL12 Widia™ KM™ Cutting Unit | Avl |
|
| 22911-6B | Techniks Inc | 1/4"" Bore 6.000"" CAT 40 Single End CoolBLAST End Mill Holder | Avl |
|
| 5751057 | Sandvik Coromant | STDCR 10 3 CoroTurn® 107 shank tool for turning | Avl |
|
| 6814416 | Sandvik Coromant | QS-3-80-LR16-20-10C CoroTurn® 300 QS shank tool for turning | Avl |
|
| 6067789 | Sandvik Coromant | C10-PCLNR-68110-19HP T-Max® P cutting unit for turning | Avl |
|
| 6461999 | Widia | WGCSML241040C W1.50 L7.00 Cut-Off Tool Holder | Avl |
|
| 5727741 | Sandvik Coromant | C4-PTFNL-27120-16W T-Max® P cutting unit for turning | Avl |
|
| 5732612 | Sandvik Coromant | LF123E067-10B-S CoroCut® 1-2 shank tool for parting and grooving | Avl |
|
| 3878414 | Widia | PCLNR3232P19 WIDIA™ ISO Tool Holder For External Turning | Avl |
|
| 5728676 | Sandvik Coromant | C5-DSSNR-35050-15 T-Max® P cutting unit for turning | Avl |
|
| 5738292 | Sandvik Coromant | PRGCR 3225P 16 T-Max® P shank tool for turning | Avl |
|
| 5751138 | Sandvik Coromant | SRDCN 2525M 12-A CoroTurn® 107 shank tool for turning | Avl |
|
| 17140-1 8 | Techniks Inc | 1/8"" Bore 2.500"" BT40 Single Ended End Mill Holder | Avl |
|
| 5732024 | Sandvik Coromant | DTJNL 2525M 16 T-Max® P shank tool for turning | Avl |
|
| 3065886 | Widia Km | KM63TSCCRNL16 Widia™ KM™ Cutting Unit | Avl |
|
| 22915-5F | Techniks Inc | 3/8"" Bore 5.000"" CAT 40 Single End CoolFLEX End Mill Holder | Avl |
|
| 5724245 | Sandvik Coromant | CCRNR 244DM1-4 T-Max® shank tool for turning | Avl |
|
| 3683488 | Widia Km | KM80TSSMC60070M Widia™ KM™ Shell Mill Adapter | Avl |
|
| 7439600 | Sandvik Coromant | C6-CRSNR-45065-09ID T-Max® cutting unit for turning | Avl |
|
| 5853800 | Sandvik Coromant | LG123H13-2525B-300BM CoroCut® 1-2 shank tool for face grooving | Avl |
|
| 3950822 | Widia Km | KM40TSBA16070M Widia™ KM™ Boring Bar Adapter | Avl |
|
| 5749516 | Sandvik Coromant | SDJCL 1212K 11-S CoroTurn® 107 shank tool for turning | Avl |
|
| CAT40SLN1 | Techniks Inc | 1"" Bore 4.000"" CAT 40 Side Lock End Mill Holder | Avl |
|
| 7192462 | Sandvik Coromant | QFT-RFH100C16-035B CoroCut® QF QS shank tool for face grooving | Avl |
|
| 5751467 | Sandvik Coromant | STGCL 1616H 16 CoroTurn® 107 shank tool for turning | Avl |
|
| 7048378 | Sandvik Coromant | QS-SVJCL082XHP-M CoroTurn® 107 QS shank tool for turning | Avl |
|
| 5751387 | Sandvik Coromant | SVABR 083C-S CoroTurn® 107 shank tool for turning | Avl |
|
| 3615475 | Widia Erickson | BT50BHPVTTHT050787 High Torque Shrink Fit Toolholder | Avl |
|
| 3753158 | Widia Km | KM50TSPWLNL08 Widia™ KM™ P-Clamping Cutting Unit | Avl |
|
| 1794233 | Widia Erickson | SS075TT038600 General Purpose Shrink Fit Toolholder | Avl |
|
| 22721-3.5 | Techniks Inc | 3/4""-3.5"" CAT50 Single Ended Face Mill Arbor | Avl |
|
| DG5164 | Clc Custom Leathercraft | Black/Yellow HD Polyester DEWALT® CLC WORK GEAR® Tape Holder | Avl |
|
| 5729464 | Sandvik Coromant | DCBNR 3232P 19 T-Max® P shank tool for turning | Avl |
|
| 3878396 | Widia | PCLNR3232P16 WIDIA™ ISO Tool Holder For External Turning | Avl |
|
| 2265358 | Widia Km | KM63TSS32LMDUNL15 Widia™ KM™ Lock-Pin Cutting Unit | Avl |
|
| 08532-05.5 | Techniks Inc | 13/64"" Black Gold ER32 Coolant Ring | Avl |
|
| 6427799 | Sandvik Coromant | QS-QD-RFE0500C06S CoroCut® QD QS shank tool for parting and grooving | Avl |
|
| 22911-1.75 | Techniks Inc | 1/4"" Bore 1.750"" CAT 40 Single End Stubby Length End Mill Holder | Avl |
|
| 5730188 | Sandvik Coromant | C6-SRDCN-00065-20A CoroTurn® 107 cutting unit for turning | Avl |
|
| 3950788 | Widia Km | KM40TSPWLNR06 Widia™ KM™ P-Clamping Cutting Unit | Avl |
|
| 3964134 | Widia Km | KM50TSST2075M Widia™ KM™ Tap Chuck | Avl |
|
| 6537468 | Sandvik Coromant | QS-RF123H20C2020E-040B CoroCut® 1-2 QS shank tool for face grooving | Avl |
|
| 5741202 | Sandvik Coromant | RF123J32-3225BM CoroCut® 1-2 shank tool for parting and grooving | Avl |
|
| 3738141 | Widia Km | KM50TSMCLNL12 Widia™ KM™ Lock-Pin Cutting Unit | Avl |
|
| 5741378 | Sandvik Coromant | RG123L079-16B-075BM CoroCut® 1-2 shank tool for face grooving | Avl |
|
| 17132 | Techniks Inc | 8mm Bore 50mm BT40 Single Ended End Mill Holder | Avl |
|
| 6188726 | Sandvik Coromant | C6-PSKNL-22110-12HP T-Max® P cutting unit for turning | Avl |
|
| 2408000 | Widia Km | KM63TSPSDNN12 Widia™ KM™ P-Clamping Cutting Unit | Avl |
|
| 6921657 | Sandvik Coromant | QS-QD-RFE0500C08S CoroCut® QD QS shank tool for parting and grooving | Avl |
|
| 5738403 | Sandvik Coromant | PCLNR 3232P 16 T-Max® P shank tool for turning | Avl |
|
| 3860035 | Widia Erickson | BTKV50BHPVTT050400 General Purpose Shrink Fit Toolholder | Avl |
|
| 3900170 | Widia | SCLCR1212F09 WIDIA™ ISO Tool Holder For External Turning | Avl |
|
| 5729747 | Sandvik Coromant | C8-DDNNN-00080-15 T-Max® P cutting unit for turning | Avl |
|
| 2044922 | Widia Km | KM50CL2SR2075D Widia™ KM™ Clamping Unit | Avl |
|
| 6950301 | Sandvik Coromant | QS-SMALR063XHP CoroCut® XS QS shank tool for parting and grooving | Avl |
|
| 8828613 | Kyocera Precision Tools Inc | DVPNL2525M16 Left Hand Indexable External Turning Holder | Avl |
|
| 6188685 | Sandvik Coromant | C5-PCLNR-27140-12HP T-Max® P cutting unit for turning | Avl |
|
| 3902238 | Widia Km | KM40TSMVHNL16050M Widia™ KM™ Lock-Pin Cutting Unit | Avl |
|
| 3615373 | Widia Erickson | BT40BHPVTT16160M General Purpose Shrink Fit Toolholder | Avl |
|
| 5749928 | Sandvik Coromant | SL-PDUNL-40-15HP T-Max® P head for turning | Avl |
|
| 3790290 | Widia Km | KM50TSBAI40090M Widia™ KM™ Boring Bar Adapter | Avl |
|
| 6498948 | Widia | WGCMEL1665C Size 65 Modular Tool Holder | Avl |
|
| 5728724 | Sandvik Coromant | C5-DCLNL-35060-16 T-Max® P cutting unit for turning | Avl |
|
| 6537546 | Sandvik Coromant | QS-RF123H080C12E-040B CoroCut® 1-2 QS shank tool for face grooving | Avl |
|
| 2407981 | Widia Km | KM63TSPDUNR11 Widia™ KM™ P-Clamping Cutting Unit | Avl |
|
| 6537540 | Sandvik Coromant | QS-RF123G055C12E-090B CoroCut® 1-2 QS shank tool for face grooving | Avl |
|
| 3878366 | Widia | PCBNR2525M16 WIDIA™ ISO Tool Holder For External Turning | Avl |
|
| 95907 | Techniks Inc | 1.5""-2.5"" HSK100 Single Ended Face Mill Arbor | Avl |
|
| 5764410 | Sandvik Coromant | 570-STFCL-25-11-B1 CoroTurn® 107 head for turning | Avl |
|
| 3879408 | Widia | PWLNR2020K08 WIDIA™ ISO Tool Holder For External Turning | Avl |
|
| 5729641 | Sandvik Coromant | C8-DCLNR-55080-25 T-Max® P cutting unit for turning | Avl |
|
| 5926244 | Sandvik Coromant | QS-RF123E11-1616B CoroCut® 1-2 QS shank tool for parting and grooving | Avl |
|
| 5728166 | Sandvik Coromant | C5-PDJNL-35060-11 T-Max® P cutting unit for turning | Avl |
|
| 5733159 | Sandvik Coromant | DTJNR 20 5D T-Max® P shank tool for turning | Avl |
|
| 5738216 | Sandvik Coromant | QS-SVJBR 103X CoroTurn® 107 QS shank tool for turning | Avl |
|
| 5728553 | Sandvik Coromant | C5-SDJCR-35060-11 CoroTurn® 107 cutting unit for turning | Avl |
|
| 6766758 | Sandvik Coromant | QS-TR-V13JBR 2020HP CoroTurn® TR QS shank tool for turning | Avl |
|
| 3662528 | Widia Km | KM80TSMCLNL25 Widia™ KM™ Lock-Pin Cutting Unit | Avl |
|
| 1801413 | Widia Erickson | SS200TT10150M General Purpose Shrink Fit Toolholder | Avl |
|
| 08532-14.0 | Techniks Inc | 35/64"" Black Gold ER32 Coolant Ring | Avl |
|
| 3594317 | Widia Km | KM80ATCHPVTT062850 Widia™ KM™ Shrink Fit Adapter | Avl |
|
| 3902256 | Widia Km | KM40TSMWLNR08 Widia™ KM™ Lock-Pin Cutting Unit | Avl |
|
| 2005656 | Widia | 12600035800 358mm-440mm ROTAFLEX™ Twin Cut Bridges - Large | Avl |
|
| 3103488 | Widia Km | KM63XMZMDJNLF1504Y Widia™ KM™ Lock-Pin Cutting Unit | Avl |
|
| 5726173 | Sandvik Coromant | CRDCN 3225P 06-A T-Max® shank tool for turning | Avl |
|
| 5739786 | Sandvik Coromant | PSKNL 4040S 19 T-Max® P shank tool for turning | Avl |
|
| 6188478 | Sandvik Coromant | PVJNL 1616H 16HP T-Max® P shank tool for turning | Avl |
|
| 5728497 | Sandvik Coromant | C5-PSRNL-27060-15 T-Max® P cutting unit for turning | Avl |
|
| 5738715 | Sandvik Coromant | QS-LF123E17-1616B CoroCut® 1-2 QS shank tool for parting and grooving | Avl |
|
| 5723556 | Sandvik Coromant | CCLNR 2525M 12-4 T-Max® shank tool for turning | Avl |
|
| 5730786 | Sandvik Coromant | DCRNR 16 5D T-Max® P shank tool for turning | Avl |
|
| 6536145 | Sandvik Coromant | SL-STFCR-25-11-B1HP CoroTurn® 107 head for turning | Avl |
|
If you have more than one item,upload your spreadsheet here.
|
Guaranteed On - Time Delivery |
|
Customized & User-Friendly Database |
|
Over 5100 Manufacturers |
|
Competitive Prices |
|
Scheduling Flexibility |
|
Complete Purchasing Solutions |
Cost Effective Warrantied inventory at competitive prices
Quick Search Search the world's largest inventory of electronic components by manufacturer, category or part number
Quality Assured We sell only warrantied and traceable parts
Fastest Delivery All inventory ready to ship from our sellers
 |
“We Proudly Support Intrepid Fallen Heroes Fund that serves United States Military Personal experiencing the Invisible Wounds of War : Traumatic Brain Injury (TBI) and Post Traumatic Stress (PTS). Please visit website (www.fallenheroesfund.org) and help in their valiant effort”. |
We hope that you will visit us again the next time you need industrial parts and make us your strategic purchasing partner.
Request for Quote